ChompSaw Accessories
Level up your cuts
Accessories can take your cutting skills to the next level by helping you make perfectly straight lines, angles, and circles.
1) Straight cuts with the Fence
1. Place down
Place the two nubs on the bottom of the Fence into the parallel slots on the ChompSaw lid.
2. Slide into position
Slide the Fence along the slots to match the size you want your cut to be (between 1/4 to 3 1/2 inches).
3. Tighten in place
Once in position, use the thumb screw to tighten the Fence into place.
4. Cut
You're ready to cut! Gently feed in your cardboard, keeping one edge pressed against the Fence to cut a perfectly straight line.
2) Precise angles with the Angle Guide
1. Place down
Place the nub on the bottom of the Angle Guide into the vertical slot on your ChompSaw lid.
2. Adjust the angle
Set your angle by aligning the edge of the Angle Guide with the marking lines on the lid (each line marks 15 degrees).
3. Cut
Hold your cardboard against the edge of the Angle Guide. Then make your cut by moving the guide along with your cardboard as you feed it into the cutting head.
3) Perfect circles with the Circle Guide
1. Choose circle size
Choose your circle radius—you can flip the Circle Guide for inches and centimeters!
2. Place down
Place the Circle Guide over the cutting head, making it perpendicular (like a “T” shape) to the cutting direction.
3. Rotate to cut
Apply pressure down on the Circle Guide and rotate the cardboard to feed it into ChompSaw cutting head and cut your circle.
